Search results

Many people feel a connection to their work that could best be described as a dependency, due to its intensity and importance to their overall self-concept. It is likely that psychological and social needs play a profound role in the connection people feel to their work; however, the explanatory power of these factors has been neglected in the literature, particularly with regard to cultural perspectives. The paper aims to discuss these issues.

To address this deficiency, the authors propose a profile multidimensional construct referred to as psycho-social work dependency, drawing on the Mandala model of self (Hwang, 2011b) and the Chinese composite self (Lu, 2003). The authors also developed a psychometrically sound 16-item questionnaire, the psycho-social work dependency scale, to measure this construct. A total of 1,314 valid questionnaires were obtained from employees in Taiwan to verify the reliability and validity of the instrument. Cross-validation was conducted using an independent sample of 278 valid questionnaires.

The results indicate good reliability and validity. What follows is a discussion of four types of psycho-social work dependency: strong, loose, direct, and indirect. Implications and suggestions for future research are also presented.

A cultural-inclusive construct-psycho-social work dependency was developed to best delineate the connections between Chinese employees and their work. This study expounded the definition, structure, measurement scale, and profile of psycho-social work dependency. These results could help OB researchers and practitioners to know more about the connections between employees and their work, especially for Chinese workers. This new construct may also stir up more studies to investigate the role of psycho-social work dependency in the workplace.

For developing the control technique of air in the manned spacecraft cabin, the CO₂ simulate control‐testing equipment is developed to study the CO₂ removal equipment in the carbon air. The developing process is introduced in this paper. On the basis of overall design, the authors emphasize the study of the cabin interface design and draw a conclusion that disposing the entrance of the gas at the same side of the cabin content the gas intimate mixing. In the design of the flow meter, using the plastic rotor can solve the problem of flow meter pressure loss which is too much by using the glass rotor.

This study aims to investigate whether higher value creation leads to higher value appropriation and to identify the boundary conditions in a buyer–supplier relationship that can explain why a particular supplier can appropriate higher value than others.

The study uses questionnaire surveys. The sample of the survey has 150 publicly-listed supplier firms in Taiwan. The unit of analysis is the buyer–supplier relationship.

In the buyer–supplier relationship, suppliers’ bargaining power, partnership and a supplier’s original brand manufacturing (OBM) business can strengthen the positive relationship between value creation and value appropriation.

This study adopts the unilateral viewpoint of suppliers; however, some constructs might require dyadic evaluation. This study only explores the spillover effect of OBM business on the relationship between value creation and appropriation.

The spillover effect of a supplier’s OBM business in a buyer–supplier relationship allows the buyer to share more common benefits and the supplier to capture more private benefits as compensation. By broadening its customer base, a supplier can increase its bargaining power. A supplier can also maintain a strategic partnership with each essential buyer.

To avoid the dark-side effect of partnership, the model provides the contingency that a supplier can capture more value from a buyer–supplier relationship.

In the process of undertaking overseas construction projects, relational governance has become indispensable for project stakeholders. This study examines how relational governance influences contractors' adaptability to foreign situations and whether such associations are positively moderated by international environmental complexity.

A crosssectional survey methodology was applied to collect primary data through questionnaires sent to domestic contractors in China and South Korea (hereafter Korea). Multiple regression analysis was used to test the effects of four dimensions of relational governance on contractor adaptability. Thereafter, the Chinese and Korean subsamples were tested separately through moderated regression analysis to explore differences in the influence of relational governance on adaptability.

The results showed that quality communication, favor exchange and establishing an emotional relationship significantly and positively affected a contractor’s adaptability. However, there were significant differences between the Chinese and Korean international contractors in terms of the moderating effects of international environment complexity.

East Asian engagement in international development is not limited to China and Korea alone, and the study should be replicated using large representative samples from more countries, such as Japan, to gain a fuller understanding of the influence of relational governance.

The results have great significance for the managers of international contractors in East Asian countries and contribute to the research on relational governance and contractor adaptability.

The purpose of this study is to develop resin composite materials composed of polycaprolactone (PCL) acrylates and hydroxyapatite (HA) nanoparticles for ultraviolet digital light projection (DLP) three-dimensional (3D) printing technique.

Two PCL-based triacrylates, namely, glycerol-3 caprolactone-triacrylate (Gly-3CL-TA) and glycerol-6 caprolactone-triacrylate (Gly-6CL-TA) were synthesized from ring-opening polymerization of ε-caprolacton monomer in the presence of glycerol and then acrylation was performed using acryloyl chloride. 3D printing resins made of Gly-3CL-TA or Gly-6CL-TA, 5% HA and 3% of photoinitiator 2,4,6-Trimethylbenzoyl-diphenyl-phosphineoxide were then formulated. The surface topography, surface element composition, flexural strength, flexural modulus, cytotoxicity and degradation of the PCL-based scaffolds were then characterized.

Resin composite composed of Gly-3CL-TA or Gly-6CL-TA and 5% (w/w) of HA can be printed by 405 nm DLP 3D printers. The former has lower viscosity and thus can form a more uniform layer-by-layer structure, while the latter exhibited a higher flexural strength and modulus after being printed. Both composite materials are non-cytotoxic and degradable.

This study provides a direction of the formulation of environment-friendly resin composite for DLP 3D printing. Both resin composites have huge potential in tissue engineering applications.

The problem that original design manufacturing (ODM) companies encounter with the request for quotation (RFQ) process is that there is no effective and efficient methodology for them to formulate accurate and profitable RFQs. The purpose of this paper is to present a quality function deployment (QFD)‐, concurrent engineering (CE)‐, and target costing‐based methodology for ODM companies to formulate accurate and profitable RFQs.

From eight Taiwan electronics ODM companies, 15 people are interviewed to understand their current methods for formulating RFQs and the problems of these methods. Based on the interview results, it was decided to make use of the merits of QFD, CE, and target costing by integrating them into the proposed methodology.

A case study is presented to illustrate a successful application of the proposed methodology in a case company. The case study shows integrating QFD, CE, and target costing into the proposed methodology allows the authors to effectively and efficiently formulate an accurate and profitable RFQ for the case company.

The interview sample quantity of this study is limited to eight Taiwan electronics companies, which is insufficient to represent all ODM companies in various industries. For the future research, it is suggested researchers collect more samples from different industries in order to verify the effectiveness of the proposed methodology in ODM companies from different industries.

This paper aims to integrate QFD, CE, and target costing to come up with a systematic ten‐step approach that can accurately formulate the three parts of an RFQ: the product specifications proposal, the product price quotation, and the product development schedule. By adopting this methodology, ODM companies can provide accurate and profitable RFQs to ODM customers, thus increasing their chances of obtaining ODM business.

The purpose of this paper is to verify the mediating role of commitment between market-oriented organizational culture and international market performance, and to discuss the moderator effect of national institutional environment on this mediating role.

The research design follows a mixed methodology, combining qualitative and quantitative data collection and analysis. In the first phase, research hypotheses are proposed based on a literature analysis. In the second phase, sample data are collected through interviews and questionnaires sent to domestic contractors in China and South Korea, and a validity analysis of the results is carried out. Correlation and regression analyses are then performed on the valid data to verify hypotheses to prove the existence and influence of mediating effects. Hayes PROCESS Macro is used on the regression results to test the mediating effect of commitment on international project performance and the moderation effect of institutional environment.

The results reveal that the commitment between partners has a mediating effect on the relationship between market culture and international project performance; however, no hierarchy culture is revealed. The mediating effect of commitment is regulated by the institutional environment.

Although the reliability and validity of the questionnaire data in this study are in line with research standards, a larger sample size would improve the reliability of the results. Further, the interviewed samples are mainly from China and South Korea; large representative samples from additional countries, such as Japan, should be considered to gain a fuller understanding and more comprehensive results.

By emphasizing the differences between the two institutional environments of developing and developed countries in East Asia, a theoretical and empirical basis is provided. International construction enterprises in other countries can apply the findings to improve their international market performance in different institutional environments. The findings also provide an empirical reference that international construction enterprises in China and South Korea may use to adjust their organizational cultures and commitments to improve market performance.

Constructing an effective production control policy is the most important issue in wafer fabrication factories. Most of researches focus on the input regulations of wafer fabrication. Although many of these policies have been proven to be effective for wafer fabrication manufacturing, in practical, there is a need to help operators decide which lots should be pulled in the right time and to develop a systematic way to alleviate the long queues at the bottleneck workstation. The purpose of this study is to construct a photolithography workstation dispatching rule (PADR). This dispatching rule considers several characteristics of wafer fabrication and influential factors. Then utilize the weights and threshold values to design a hierarchical priority rule. A simulation model is also constructed to demonstrate the effect of the PADR dispatching rule. The PADR performs better in throughput, yield rate, and mean cycle time than FIFO (First‐In‐First‐Out) and SPT (Shortest Process Time).

This study examines how project uncertainties (environmental uncertainty and participant uncertainty) affect guanxi and contractual governance and assesses the mediating role of guanxi governance between project uncertainty and contractual governance.

Data were collected in two stages from Chinese contractors. First, in-depth interviews were conducted with nine construction engineering project practitioners in different contracts as a pilot for questionnaire designing. Second, a cross-sectional questionnaire survey was conducted with professionals and practitioners of construction enterprises to collect primary data. Partial least squares structural equation modeling (PLS-SEM) was used to test seven hypotheses based on data collected from 198 respondents.

Project environmental uncertainty promotes the use of guanxi governance, while project participant uncertainty hinders it; the relationship between both types of uncertainty and contractual governance is the same as with guanxi governance. Furthermore, guanxi governance promotes contractual governance and partially mediates project environmental uncertainty and contractual governance and a complete mediating role between project participant uncertainty and contractual governance.

As the interviewed samples are mainly from China, the study should be replicated using large representative samples from East Asian countries, such as Japan and South Korea, to gain a more comprehensive understanding of the influence of guanxi governance. Further, while the internal consistency reliability and convergent validity of the questionnaire data in this study align with the standards, a larger sample size would improve the reliability and validity of the research results and better represent the overall work situation of contractors, owners and public policymakers.

The results provide insights into project governance research and have implications for construction practitioners in deploying governance-related resources.